GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Bonneville 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Front Floor Console Cup Holder Replacement

Removal Procedure
  1. Remove the console storage bin. Refer to Front Floor Console Compartment Replacement .
  2. Remove the rubber pad in the bottom of the cupholder.

    3. Object Number: 510776 Size: SH
  3. Remove the fasteners (1) securing the cup holder to the center console.

    4. Object Number: 510778 Size: SH
  4. Lift the rear of the cupholder and slide rearward in order to remove.

Installation Procedure

    Object Number: 510778 Size: SH
  1. Slide the front of the cupholder under the console trim plate.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.


    Object Number: 510776 Size: SH
  2. Install the cupholder fasteners (1).

    3. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  3. Install the rubber pad into the bottom of the cupholder.
  4. Install the console storage bin. Refer to Front Floor Console Compartment Replacement .