GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2002 🢒 Bonneville 🢒 Body and Accessories 🢒 Instrument Panel, Gages, and Console 🢒 Instrument Panel Compartment Door Lock Striker Replacement

Removal Procedure
  1. Open the instrument panel (IP) compartment.

    2. Object Number: 639649 Size: SH
  2. Remove the fasteners (2) that secure the IP compartment striker (1) to the upper area of the lower IP.
  3. Remove the IP compartment striker (1).

Installation Procedure

    Object Number: 639649 Size: SH
  1. Align the instrument panel (IP) compartment striker (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the IP storage compartment fasteners (2) to the IP.

    3. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).

  3. Close the IP compartment.
  4. Adjust the striker. Refer to Instrument Panel Compartment Door Lock Striker Adjustment .