Back-Up Lamp
Turn Signal
Taillamp
Taillamp/Brake Lamp
- Open the trunk. See
Trunk
for more information.
- Turn the screws located inside of the trunk counterclockwise and remove
them.
- Remove the plastic trim piece from the trunk.
- Pull the carpeting away from the rear corner of the trunk.
- Remove the three nuts holding the lamp in
place and remove the lamp assembly.
- Turn the bulb socket assembly counterclockwise while pressing the release,
to remove it from the lamp assembly.
- Pull the bulb straight out of the socket.
- Replace the bulb and reverse Steps 1 through 6 to reinstall the
lamp assembly.