Other messages or warnings may appear in the DIC display. For Canadian drivers,
in addition to the DIC message your DIC will display EXP with a number after it which
reflects the following messages:
EXP (Export ID)
| Warning Message
|
6
| TRANSMISSION HOT IDLE ENGINE**
|
9
| CHECK GAGES VOLT
|
11
| CHECK GAGES LOW FUEL
|
15
| LOW ENGINE COOLANT**
|
16
| ENGINE HOT A/C DISABLED
|
20
| TURN SIGNAL ON?
|
24
| TRUNK AJAR
|
25
| WASHER FLUID LOW
|
27
| BATTERY SAVER ACTIVE
|
32
| ENGINE HOT IDLE ENGINE**
|
33
| STARTING DISABLED -- THEFT*
|
34
| SERVICE THEFT SYSTEM
|
35
| CHECK GAGES OIL PRESSURE*
|
36
| OIL LEVEL LOW
|
37
| BRAKE FLUID LOW*
|
40
| ALARM OCCURRED
|
44
| CHECK GAGES TEMPERATURE*
|
54
| SERVICE STABILITY SYSTEM
|
55
| STABILITY SYSTEM ACTIVE
|
61
| CHECK GAS CAP
|
81
| ENGINE OIL CHANGE SOON
|
83
| SERVICE AIR BAG
|
102
| CHECK CHARGE SYSTEM
|
111
| ENGINE HOT STOP ENGINE**
|
140
| DRIVER DOOR AJAR
|
141
| FRONT PASSENGER DOOR AJAR
|
142
| LEFT REAR DOOR AJAR
|
143
| RIGHT REAR DOOR AJAR
|
144
| CHECK TIRE PRESSURE
|
147
| PARK BRAKE SET*
|
The EXP codes are used to make translation from English to other languages easier.
|
Pressing any of the DIC control buttons will remove the above messages or warnings
from the DIC display, unless noted by an asterisk (*).
|
Messages followed by a double asterisk (**) only apply to vehicles with the
4.6L V8 engine.
|
SERVICE STABILITY SYSTEM - 54: If you ever see the SERVICE
STABILITY SYSTEM message, it means there may be a problem with your stability enhancement
system. If you see this message, try to reset the system: stop, turn off the engine,
then start the engine again. If the SERVICE STABILITY SYSTEM message still comes on,
it means there is a problem. You should see your GM dealer for service. Reduce
your speed and drive accordingly.
STABILITY SYSTEM ACTIVE - 55: You may see the STABILITY
SYSTEM ACTIVE message on the Driver Information Center. It means that an advanced,
computer-controlled system has come on to help your vehicle continue to go in the
direction in which you are steering. This stability enhancement system activates when
the computer senses that your vehicle is just starting to spin, as it might if you
hit a patch of ice or other slippery spot on the road. When the system is on, you
may hear a noise or feel a vibration in the brake pedal. This is normal.
When the STABILITY SYSTEM ACTIVE message is on, you should continue to steer in the
direction you want to go. The system is designed to help you in bad weather or other
difficult driving situations by making the most of whatever road conditions will permit.
If the STABILITY SYSTEM ACTIVE message comes on, you will know that something has
caused your vehicle to start to spin, so you should consider slowing down.
Tire Pressure Status - 144: If you see the CHECK TIRE
PRESSURE message, you should stop as soon as you can and check all your tires for
damage. If a tire is flat, see
If a Tire Goes Flat
.
Also check the tire pressure in all four tires as soon as you can. See
Inflation - Tire Pressure
and
Check Tire Pressure System
.