GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 332513  Size: SH
  1. Turn OFF the ignition.
  2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  3. Disconnect the lateral accelerometer sensor electrical connector (2).
  4. Remove the 2 lateral accelerometer sensor screws (3).
  5. Remove the lateral accelerometer sensor (1).

Installation Procedure


    Object Number: 332513  Size: SH
  1. Install the lateral accelerometer sensor (1).
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the 2 lateral accelerometer sensor screws (3).
  4. Tighten
    Tighten the 2 lateral accelerometer sensor screws to 2.4 N·m (21 lb in).

  5. Connect the lateral accelerometer sensor electrical connector (2).
  6. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  7. Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.