Removal Procedure
- Remove the I/P carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges
and Console.
- Place the I/P carrier face down on a clean work surface.
- Remove the air distributor
duct bolts.
- Remove the air distributor from the I/P carrier.
Installation Procedure
- Install the air distributor
to the I/P carrier.
- Install the air distributor duct bolts.
Tighten
Tighten the air distributor duct bolts to 2.2 N·m (19 lb in).
- Install the I/P carrier. Refer to
Instrument Panel Carrier Replacement
in Instrument Panel, Gauges and Console.