For 1990-2009 cars only
Removal Procedure
- Remove the front floor console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gauges, and Console.
- Remove the range selector lever cable from the transmission control.
- Remove the retainer and the cable grommet from the base of the transmission control.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Unsnap the transmission range selector lever cable from the range selector lever on the transmission.
- Remove the retainer from the range selector lever cable.
- Remove the range selector lever cable from the cable bracket.
- Pull the cable through the hole in the front compartment floor pan.
- Remove the cable from the vehicle.
Installation Procedure
- Route the cable through the hole in the front compartment floor pan.
- Install the cable grommet to the base of the transmission control.
- Install the range selector lever cable to the cable bracket.
- Move the range selector lever into the Neutral position. Rotate the lever counterclockwise from Park through Reverse and into Neutral.
- Install the range selector lever cable to the range selector lever on the transmission.
- Install the range selector lever cable retainer to the range selector lever on the transmission.
- Lower the vehicle.
- Place the transmission control in Neutral.
- Install the range selector lever cable to the transmission control.
- Install the lock adjustment button on the cable to the range selector bracket. Turn the lock adjustment button counterclockwise.
- Install the front floor console trim plate. Refer to Console Trim Plate Replacement in Instrument Panel, Gauges, and Console.
Important: The transmission control must remain in the Neutral position until the cable installation is complete.
