For 1990-2009 cars only
Removal Procedure
- Remove the brake rotor. Refer to Brake Rotor Replacement in Disc Brakes.
- Remove the parking brake shoe retaining clip and attaching screw.
- Remove the parking brake shoe by sliding the brake shoe downward off tappet slot.
Installation Procedure
- Turn the adjustable tappet until the tappet is seated against adjuster nut. Orient the slot radially (parallel with mounting flange).
- Install the parking brake shoe by sliding the shoe upwards into the tappet slots.
- Install the parking brake shoe retaining clip and the attaching screw.
- Adjust the parking brake shoe to drum clearance. Refer to Parking Brake Shoe Adjustment .
- Install the brake rotor. Refer to Brake Rotor Replacement in Disc Brakes.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Clip screw to 5 N·m (44 lb in).
