The Outlet valve solenoid circuits are supplied with battery power when the ignition is in the RUN position. The EBCM/EBTCM controls the valve functions by grounding the circuit when necessary.
The EBCM/EBTCM senses a discrepancy such as an open, short to ground, or short to voltage in the circuit.
• | A malfunction DTC is stored. |
• | ABS/TCS disabled |
• | ABS/TCS Indicators are turned on. |
• | The Red BRAKE Warning Indicator turns on. |
• | Condition for DTC is no longer present and scan tool clear DTC function is used. |
• | 100 ignition cycles pass with no DTC detected. |
The numbers below refer to step numbers on the Diagnostic Table.
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Was the Diagnostic System Check performed? | -- | ||
Does DTC C0075 reset as a current DTC? | -- | |||
3 | Replace the EBCM/EBTCM. Refer to Electronic Brake Control Module Replacement . Is the repair complete? | -- | -- |