1. Turn the ignition switch to the RUN position.
2. Place the multi-function lever in the right turn position.
3. Observe the right front park/turn lamp.

Does the right turn signal operate?

--

Go to Step 2

Go to Exterior Lights

1. Remove the instrument cluster.
2. Connect a test lamp from the instrument cluster connector terminal B10 to ground.
3. Turn the ignition switch to the RUN position.
4. Place the multi-function lever in the right turn position.

Does the test lamp blink on then off?

--

Go to Step 3

Go to Step 4

1. Check for a poor connection at the instrument cluster terminal B10.
2. If the connection is OK, replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

System OK

--

Repair the open in circuit 1415 (USA or Gulf States) or circuit 15 (Europe or Japan).

Is the repair complete?

--

System OK

--