Removal Procedure
- Remove the steering column
tilt wheel release lever, if equipped with cruise control. Refer to
Tilt Lever Replacement - On Vehicle
.
- Remove the access cover, if equipped with cruise control.
- Disconnect the electrical connectors (4, 5), if equipped with
cruise control.
- Grasp the lever firmly
(1).
- Pull the lever (1) straight out in order to remove.
Installation Procedure
- Position the tang (2)
on the lever (1) to the notch (3) in the column (4).
Important: Ensure that the wiper switch is in the OFF position before you install
the lever.
- Install the lever (1) to the column (4).
Important: Ensure that the lever (1) is fully seated.
- Install the electrical connectors, if equipped with cruise control.
- Install the access cover, if equipped with cruise control.
- Install the steering column tilt wheel release lever, if equipped
with cruise control. Refer to
Tilt Lever Replacement - On Vehicle
.