Fog Lamps Inoperative - All Domestic
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire fog lights system check performed? | -- | Go to Fog Lights System Check | |
2 |
Did the test light illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 | Use a test light in order to backprobe between the foglamp relay connector terminal F9 and ground. Did the test light illuminate? | -- | Go to Step 5 | Go to Step 6 |
4 | Use a test lamp to backprobe between the foglamp switch harness connector circuit 9 and ground. Did the test light illuminate? | -- | Go to Step 13 | Go to Step 12 |
5 | Repair a poor connection or open in circuit 34. Is the repair complete? | -- | -- | |
6 | Connect a test light between the foglamp relay and terminals E11 and E9. Does the test light illuminate? | -- | ||
7 | Connect a test light between the foglamp relay connector terminals F11 and E9. Does the test light illuminate? | -- | ||
8 | Connect a test light between the foglamp relay connector terminal E11 and ground. Does the test light illuminate? | -- | ||
9 | Replace the foglamp relay. Refer to Fog Lamp Relay Replacement Is the repair complete? | -- | -- | |
10 | Repair a poor connection or open in circuit 317. Is the repair complete? | -- | -- | |
11 | Repair a poor connection or open in circuit 11. Is the repair complete? | -- | -- | |
12 | Repair a poor connection or open in circuit 9. Is the repair complete? | -- | -- | |
13 | Replace the foglamp switch. Refer to Fog Lamp Switch Replacement Is the repair complete? | -- | -- | |
14 |
Have all the repairs been made? | -- | Go to Fog Lights System Check | -- |
Fog Lamps Inoperative - All Europe
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire fog lights system check performed? | -- | Go to Fog Lights System Check | |
2 |
Did the test light illuminate? | -- | ||
3 | Connect a test light at the BCM connector C3 terminal D9 and B+. Does the test light illuminate? | -- | ||
4 | Use a test light to backprobe between the fog lamp switch harness connector terminal F and B+. Did the test light illuminate? | -- | ||
5 | Replace the fog lamp switch. Refer to Fog Lamp Switch Replacement Is the repair complete? | -- | -- | |
6 | Repair poor connection or open in circuit 650. Is the repair complete? | -- | -- | |
7 | Connect a test light at the BCM connector C3 terminal C8 and B+. Does the test light illuminate? | -- | ||
8 | Repair the poor conection or open in circuit 187. Is the repair complete? | -- | -- | |
9 | Connect a test light at the fog lamp relay cavity A1 and B+. Does the test light illuminate? | -- | ||
10 | Replace the BCM. Refer to Body Control Module Replacement Is the repair complete? | -- | -- | |
11 | Connect a test light between the fog lamp relay cavities C2 and A1. Does the test light illuminate? | -- | ||
12 | Repair the poor connection or open in circuit 1977. Is the repair complete? | -- | -- | |
13 | Connect a test light between the fog lamp relay cavaties A1 and C1. Does the test light illuminate? | -- | ||
14 | Repair a poor connection or open in circuit 10. Is the repair complete? | -- | -- | |
15 | Connect a test light between the fog lamp relay cavaties A1 and A2. Does the test light illuminate? | -- | ||
16 | Repair a poor connection or open in circuit 9. Is the repair complete? | -- | -- | |
17 | Connect a test light between one of the fog lamps connector terminal A and ground. Does the test light illuminate? | -- | ||
18 | Replace the fog lamp relay. Refer to Fog Lamp Relay Replacement Is the repair complete? | -- | -- | |
19 | Repair a poor connection or open in circuit 1250. Is the repair complete? | -- | -- | |
20 | Repair a poor connection or open in circuit 122. Is the repair compete? | -- | -- | |
21 |
Have all the repairs been made? | -- | Go to Fog Lights System Check | -- |
