Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the entire exterior lights system check performed? | -- | Go to Step 2 | |
2 | Do the hazard lamps operate properly? | -- | Go to Step 3 | Go to Hazard Lamps Inoperative |
3 | Using a test light, backprobe between the stop lamp switch harness connector C1 between terminal A and ground. Does the test light illuminate? | -- | Go to Step 4 | Go to Step 5 |
4 |
Does the test light illuminate? | -- | Go to Step 6 | Go to Step 7 |
5 | Repair a poor connection or and open in circuit 140. Is the repair complete? | -- | Go to Step 8 | -- |
6 | Repair a poor connection or an open in circuit 20. Is the repair complete? | -- | Go to Step 8 | -- |
7 | Adjust/Replace the stop lamp switch. Refer to Stop Lamp Switch Adjustment Stop Lamp Switch Replacement Is the repair complete? | -- | Go to Step 8 | -- |
8 |
Have all repairs been made? | -- | -- |
