Was the Wiper/Washer System Check performed?

--

Go to Step 2

Go to Wiper/Washer System Check

1. Set the ignition switch to RUN.
2. Set the wiper switch to OFF.
3. Disconnect the wiper/washer switch connector C215.

Does the washer keep running?

--

Go to Step 3

Go to Step 4

Repair the short to voltage in CKT 94 or CKT 228.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

Replace the wiper/washer switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle .

Is the replacement complete?

--

Go to Wiper/Washer System Check

--