Radio Speaker Amplifier Replacement Coupe

1. Remove the right quarter inner rear trim finishing panel.



2. Disconnect the amplifier electrical connector (2).
3. Remove the radio amplifier bolts (4).
4. Squeeze the pin (5) together.
5. Unsnap the pin (5) from the quarter inner panel.

Lift amplifier clip (3) off wheelhouse flange.

6. Remove the amplifier (1).

1. Install the amplifier (1).
2. Place clip (3) over wheelhouse flange.

Snap pin (5) into hole in quarter inner panel.

3. Install the amplifier bolts (4).

Tighten
Tighten the amplifier bolts (4) to 4 N·m (35 lb in).

4. Connect the amplifier electrical connector (2).
5. Install the right quarter inner trim finishing panel.

Radio Speaker Amplifier Replacement Convertible

1. Remove the right quarter inner trim finish panel.



2. Disconnect the amplifier electrical connector (1).
3. Remove the amplifier bolts (2).
4. Remove the amplifier, lift the amplifier up to remove the tabs from the wheelhouse flange.

1. Install the amplifier, place the tabs over the wheelhouse flange.
2. Install the amplifier bolts (2).

Tighten
Tighten the amplifier bolts (2) to 4 N·m (35 lb in).

3. Connect the amplifier electrical connector (1).
4. Install the right quarter inner trim finish panel.