Step
| Action
| Value(s)
| Yes
| No
|
1
| Backprobe with a test lamp between the body control module (BCM)
connector C2 terminal B and ground.
Does the test lamp light?
| --
|
Go to Step 2
|
Go to Step 5
|
2
|
- Disconnect the left door lock switch connector.
- With a test lamp connected to the left door lock switch connector
terminal A, backprobe BCM connector C2 terminal B.
Does the test lamp light?
| --
|
Go to Step 4
|
Go to Step 3
|
3
| Repair the open
in CKT 750, between G200 and S220.
Is the repair complete?
| --
| System OK
| --
|
4
|
- Reconnect the left door lock switch connector.
- Using a test lamp, backprobe between BCM connector C1 terminal B
and ground.
- While observing the test lamp, move the left door lock switch
to the LOCK position.
Does the test lamp light?
| --
|
Go to Step 6
|
Go to Step 7
|
5
| Repair the open in circuit 40.
Is the repair complete?
| --
| System
OK
| --
|
6
| Repair the open in CKT 295, between the BCM and S504.
Is the repair complete?
| --
| System OK
| --
|
7
|
- Test BCM connector C2 terminal B for a poor connection.
- Test BCM connector C1 terminal B for a poor connection.
- If the connections are OK, replace the BCM. Refer to
Body Control Module Replacement
.
Is the repair complete?
| --
| System OK
| --
|
