1. Disconnect the power window control module connector.
2. Connect a test lamp from power window control module connector terminal A to terminal C.
3. Turn the ignition switch to RUN.

Does the test lamp light?

--

Go to Step 3

Go to Step 2

1. Check for an open in circuit 164 between the power window control module terminal A and splice S263.
2. If circuit 164 is OK, repair the open in circuit 341 between the power window control module and splice S208.

Is the repair complete?

--

System OK

--

1. Check for a poor connection at the power window control module.
2. If the connections are OK, replace the power window control module.

Is the repair complete?

--

System OK

--