Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Set the mirror select switch to the LEFT or RIGHT position, as
needed.
- If the left mirror is inoperative, backprobe with a test lamp
from the outside rearview mirror switch connector terminal B to terminal C.
- If the right mirror is inoperative, backprobe with a test lamp
from the outside rearview mirror switch connector terminal G to terminal F.
- While observing the test lamp, press the mirror position switch
to the UP position.
Does the test lamp light?
| --
|
Go to Step
3
|
Go to Step 2
|
2
|
- Test for a poor connection at the outside rearview mirror switch
connector.
- If OK, replace the outside rearview mirror switch.
Is the repair complete?
| --
| System OK
| |
3
|
- Using a test lamp, backprobe from outside rearview mirror connector
terminal D to terminal C.
- Press the mirror position switch to the UP position while observing
the test lamp.
Does the test lamp light?
| --
|
Go to Step
4
|
Go to Step 5
|
4
|
- Test for a poor connection at the outside rearview mirror connector.
- If OK, replace the mirror motor pack within the power mirror.
Refer to
Outside Rearview Mirror Replacement
.
Is the repair complete?
| --
| System OK
| --
|
5
|
- If the left mirror is inoperative, test for an open in circuit 88,
between mirror switch terminal B and mirror connector terminal D.
- If OK, repair the open in circuit 82, between S501 and
mirror connector terminal C.
- If the right mirror is inoperative test for an open in circuit 1498,
between mirror switch terminal G and mirror connector terminal D.
- If OK, repair the open in circuit 90, between S610 and
mirror connector terminal B.
Is the repair complete?
| --
| System OK
| --
|
Step
| Action
| Value(s)
| Yes
| No
|
1
|
- Use the mirror select switch to select the inoperative mirror.
- If the left mirror is inoperative, backprobe with a test lamp
from the outside rearview mirror switch connector terminal C to terminal E.
- If the right mirror is inoperative, backprobe with a test lamp
from the outside rearview mirror switch connector terminal C to terminal F.
- While observing the test lamp, press the mirror position switch
to the UP position.
Does the test lamp light?
| --
|
Go to Step
3
|
Go to Step 2
|
2
|
- Test for a poor connection at the outside rearview mirror switch
connector.
- If OK, replace the outside rearview mirror switch.
Is the repair complete?
| --
| System OK
| |
3
|
- Using a test lamp, backprobe from outside rearview mirror connector
terminal D to terminal C.
- Press the mirror position switch to the UP position while observing
the test lamp.
Does the test lamp light?
| --
|
Go to Step
4
|
Go to Step 5
|
4
|
- Test for a poor connection at the outside rearview mirror connector.
- If OK, replace the mirror motor pack within the power mirror.
Refer to
Outside Rearview Mirror Replacement
.
Is the repair complete?
| --
| System OK
| --
|
5
|
- If the left mirror is inoperative, test for an open in circuit 88,
between mirror connector terminal D and S261.
- If OK, repair the open in circuit 89, between mirror connector
terminal C and mirror switch terminal E.
- If the right mirror is inoperative test for an open in circuit 88,
between mirror connector terminal D and S261.
- If OK, repair the open in circuit 1498, between mirror
connector terminal C and mirror switch connector terminal F.
Is the repair complete?
| --
| System OK
| --
|
