Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Control Assy to Interior Floor Retaining Bolt | 25 N·m | 19 lb ft |
Accelerator Control Assy to Interior Floor Retaining Nut | 20 N·m | 15 lb ft |
Accelerator Control Assy to Floor-Exterior Retaining Bolt | 8 N·m | 10 lb ft |
Camshaft Position (CMP) Sensor Retaining Bolt | 10 N·m | 89 lb in |
Crankshaft Balancer Bolt | 150 N·m +76° | 110 lb ft +76° |
Crankshaft Position (CKP) Sensor Bolts | 30 N·m | 22 lb ft |
EGR Valve Adapter Pipe Bolt | 50 N·m | 37 lb ft |
EGR Valve Adapter Pipe Stud | 50 N·m | 37 lb ft |
EGR Valve Intake Pipe to Exhaust Manifold Bolt | 29 N·m | 21 lb ft |
EGR Valve Outlet Pipe to Adapter Nut | 29 N·m | 21 lb ft |
EGR Valve Outlet Pipe to Intake Manifold Bolt | 29 N·m | 21 lb ft |
EGR Valve to Retaining Nuts | 30 N·m | 22 lb ft |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
Engine Oil Level Switch | 22 N·m | 17 lb ft |
EVAP Vent Valve Bracket | 2 N·m | 18 lb in |
Fuel Filler Neck Bolts | 2 N·m | 18 lb in |
Fuel Injector Sight Shield | 2 N·m | 18 lb in |
Fuel Line Retainer | 12 N·m | 106 lb in |
Fuel Rail Attaching Nuts or Bolts | 10 N·m | 89 lb in |
Fuel Rail Hold-Down Stud | 25 N·m | 18 lb ft |
Fuel Tank Filler Pipe EVAP Pipe Hose Clamp | 2.5 N·m | 22 lb in |
Fuel Tank Filler Pipe Ground Strap Screw | 9 N·m | 80 lb in |
Fuel Tank Filler Pipe Hose Clamp | 2.5 N·m | 22 lb in |
Fuel Tank Retaining Strap Bolts | 48 N·m | 35 lb ft |
Heated Oxygen Sensor(s) | 41 N·m | 30 lb ft |
Ignition Coil to Ignition Control Module Screws | 4.5 N·m | 40 lb in |
Ignition Control Module 14 Way Connector To Module Bolt | 2.1 N·m | 19 lb in |
In-Line Fuel Filter Outlet Nut | 30 N·m | 22 lb ft |
Intake Air Duct Clamps | 2 N·m | 18 lb in |
Knock Sensor | 19 N·m | 14 lb in |
Knock Sensor Heat Shield Bolts | 60 N·m | 44 lb ft |
Manifold Absolute Pressure (MAP) Sensor Retaining Screw | 5 N·m | 44 lb in |
Mass Air (MAF) Flow Sensor Attaching Screws | 3 N·m | 27 lb in |
PCM Harness Connector to PCM | 8 N·m | 71 lb in |
Powertrain Control Module (PCM) Bolts | 8 N·m | 71 lb in |
Spark Plugs | 27 N·m | 20 lb ft |
TAC Module to Accelerator Control Bracket Bolts | 6 N·m | 53 lb in |
Throttle Body Retaining Nuts or Bolts | 10 N·m | 89 lb in |
Throttle Body Support Bracket Bolts | 11 N·m | 97 lb in |
Transaxle Range Switch Attaching Bolts | 28 N·m | 20 lb ft |
Wheel Lug Nuts | 140 N·m | 104 lb ft |