Apply clean engine oil to the following components:
•
The rocker-arm shaft
•
The rocker Arms (1, 2)
After applying the engine
oil to the rocker-arm shafts and to the rocker arms, do the following.Carefully
slide the rocker-arm shaft into the cylinder head with the holes facing up
while installing the exhaust rocker-arms and the springs in the correct sequence.
Install the rocker-arm
shaft bolts (1).
Tighten Tighten the rocker-arm shaft bolts to 11 N·m (97 lb in).
Install the intake rocker
arms (1) onto the rocker-arm shaft in the correct sequence.