GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 351440  Size: SH

    Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:

       • Turn off the lamp switch and allow the bulb to cool before changing the bulb.
       • Leave the lamp switch OFF until the bulb change is complete.
       • Always wear eye protection when changing a halogen bulb.
       • Handle the bulb only by its base. Avoid touching the glass.
       • Keep dirt and moisture off the bulb.
       • Properly dispose of the used bulb.
       • Keep halogen bulbs out of the reach of children.

  1. Remove the 2 screws (1, 7) that retain the headlamp (6).
  2. Remove the bulb sockets from the headlamp.
  3. Remove the headlamp from the vehicle.

Installation Procedure


    Object Number: 351440  Size: SH
  1. Install the bulb sockets to the headlamp.
  2. Install the headlamp (6) to the vehicle. Secure the headlamp with the 2 screws (1, 7).
  3. Adjust the headlamp aim. Refer to Headlamp Aiming .