Step
| Action
| Value(s)
| Yes
| No
|
1
| Did you perform the System Check?
| --
| Go to
Step 2
| Go to
Radio/Audio System Check
|
2
|
- Turn the ignition switch to the LOCK position.
- Disconnect the radio connector.
- Connect a J 39200
digital multimeter from the radio connector cavity 11 to ground.
- Measure the voltage.
Does the multimeter read the approximate battery voltage?
| --
| Go to
Step 3
| Go to
Step 4
|
3
|
- Connect a J 39200
digital multimeter from the radio connector cavity 11 to cavity 9.
- Measure the voltage.
Does the multimeter read the approximate battery voltage?
| --
| Go to
Step 5
| Go to
Step 6
|
4
|
- Inspect for an open in WHT wire between the junction block
and the radio.
- If the wire is OK, replace the junction block.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
5
|
- Connect a J 39200
digital multimeter from the radio connector cavity 4 to cavity 9.
- Measure the voltage.
Does the multimeter read the approximate battery voltage?
| --
| Go to
Step 7
| Go to
Step 8
|
6
|
- Inspect for an open in BLK wire between the radio and ground
G202.
- If the wire is OK, remove the radio for repair.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
7
|
- Inspect the radio connector for terminals shorted together.
- If the terminals are OK, remove the radio for repair.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
8
|
- Inspect for an open in the WHT/BLK wire between the junction block
and the radio.
- If the wire is OK, remove the radio for repair.
Is the repair complete?
| --
| Go to
Radio/Audio System Check
| --
|
