GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 352116  Size: SH
  1. Disconnect the following connectors from the radio by accessing through the instrument panel compartment:
  2. • The radio electrical connector
    • The antenna connector
  3. Remove the ashtray from the track by pushing down on the retainer and pulling out.
  4. Remove the following components from the instrument panel:
  5. 3.1. 4 screws (1)
    3.2. The center trim bezel (3)

    Object Number: 352120  Size: MH
  6. Remove the cross-recess screw (1) from under the back of the radio. Access the screw through the ashtray cutout in the instrument panel.
  7. Remove 4 screws from the front of the radio.
  8. Remove the radio with the mounting bracket from the vehicle.
  9. Remove 5 screws and 3 radio mounting brackets from the radio, if necessary.

Installation Procedure

  1. Install the radio mounting brackets to the radio, if removed. Secure the brackets with the 5 screws.

  2. Object Number: 352120  Size: MH
  3. Install the radio to the instrument panel. Secure the radio with 4 screws (1).
  4. Install the cross-recess screw to the radio rear mounting bracket. Access through the ashtray cutout in the instrument panel.

  5. Object Number: 352116  Size: SH
  6. Install the center trim bezel (3) to the instrument panel. Secure the bezel with the 4 screws (1).
  7. Install the ashtray to the ashtray track.
  8. Connect the following connectors. Access through the instrument panel compartment:
  9. • The radio electrical connector
    • The antenna connector