Removal Procedure
- Disconnect the antenna
connector from the back of the radio. Access through the instrument panel
compartment.
- Remove the antenna cable from the clips under the instrument panel.
- Remove 2 clips and the left hinge pillar trim panel from
the vehicle.
- Remove the left windshield side garnish molding.
- Remove the antenna cable from the clips on the left windshield
side panel.
- Attach a piece of rigid wire (1) to the antenna cable (2).
This will aid in the removal and the installation of the cable through the
windshield side pillar.
- Remove the following components
from the roof of the vehicle:
| 7.1. | 2 antenna mast screws |
| 7.2. | The antenna mast (1) |
- Remove the rigid wire (1)
from the antenna cable (2). Leave the rigid wire in the windshield
in order to aid in antenna installation.
Installation Procedure
- Attach the rigid wire (1)
to the antenna cable (2).
- Guide the antenna cable
and the antenna mast (1) through the windshield side pillar with the
aid of the rigid wire.
- Install the antenna mast screws.
- Remove the rigid wire (1)
from the antenna cable (2).
- Install the antenna cable to the clips on the left windshield
side panel.
- Install the left windshield side garnish molding.
- Install the left hinge pillar trim panel to the vehicle. Secure
the trim panel with the 2 clips.
- Install the antenna cable to the clips under the instrument panel.
- Connect the antenna connector to the radio. Access through the
instrument panel compartment.
