Removal Procedure
- Remove the A/C compressor
control module (2) from the evaporator case by performing the following
actions:
• | Slide the module (2) up. |
- Disconnect the electrical connector of the A/C compressor control
module .
- Remove the A/C compressor control module from the vehicle.
Installation Procedure
- Install the A/C compressor
control module (2) to the vehicle.
- Connect the electrical connector of the A/C compressor control
module .
- Install the A/C compressor control module to the evaporator case.
Slide and snap the A/C compressor control module into place.