Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Audible Warnings System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Connect a test lamp from connector cavity 5 of the audio alarm module to ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Use a test lamp in order to backprobe the connector cavity for the left door jamb switch to B+. Does the test lamp light? | -- | Go to Step 9 | Go to Step 10 |
5 |
Does the test lamp light? | -- | Go to Step 7 | Go to Step 8 |
6 | Replace the audio alarm module. Is the repair complete? | -- | -- | |
7 | Test the BLK/WHT wire for a short to B+ between connector C4 cavity 3 of the junction block, connector C3 cavity 11 of the instrument panel cluster assembly, and connector cavity 5 of the audio alarm module. Is there a short to B+ in the BLK/WHT wire? | -- | Go to Step 11 | Go to Step 12 |
8 | Replace the junction block. Is the repair complete? | -- | -- | |
9 | Repair the open in the BLK/BLU wire between the audio alarm module and the left door jamb switch. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
10 |
Is the repair complete? | -- | -- | |
11 | Repair the short to B+ in the BLK/WHT wire. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
12 | Replace the Instrument cluster printed circuit. Refer to Printed Instrument Cluster Circuit Replacement . Is the repair complete? | -- | -- |
