GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 1999 🢒 Firefly (Canada) 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Trim Panel Replacement

Removal Procedure

    Object Number: 352191 Size: SH
  1. Pull the rear door molding from the rear door (2).
  2. Remove the following components from the door:
    3. • The screw
    • The inside handle bezel (1)

    Object Number: 352075 Size: SH
  3. Remove the window regulator handle (1) by using a cloth in order to pull off the snap ring.

    4. Object Number: 352186 Size: MH
  4. Remove the following components from the rear side door trim (4):
    5. • The screw
    • The rear door pull handle
  5. Gently pry the door trim (4) from the door (1) by disengaging the retainers.
  6. Disconnect the power window switch connector, if necessary.
  7. Remove the door trim (4) from the vehicle.

Installation Procedure

    Object Number: 352186 Size: MH
  1. Connect the power window switch connector, if necessary.
  2. Position the rear side door trim (4) to the rear door (1).
  3. Press the door trim retainers into position.
  4. Install the rear door pull handle to the door trim (4). Secure the handle with the screw.

    5. Object Number: 352191 Size: SH
  5. Install the inside handle bezel (1). Secure the bezel with the screw.
  6. Install the snap ring to the window-regulator handle (3).
  7. Set the regulator handle (3) at a 45-degree angle when the rear door window is completely closed.
  8. Install the regulator handle (3) to the door.
  9. Install the rear door molding to the door (2).