Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Battery Voltage Signal | BCM | Volts | 12.6 Volts |
Hood Ajar Switch | BCM, Keyless/Remote Start Data | Closed/Ajar | Closed |
Idle Boost Level | BCM | Amps | 0 Amps |
Remote Start Attempts | BCM, Keyless/Remote Start Data | Counts | 0 Counts |
Remote Start Disable A | BCM, Remote Start Disable History Data | None, BTSI Fault, Theft Mode, Invalid, Hazard On, Hood Ajar, Hood Fault, Ignition, Ext. Crank | None |
Remote Start Disable B | BCM, Remote Start Disable History Data | None, Key in Ignition, Battery Voltage, Abort, Power Mode, Invalid | None |
Remote Start Equipped | BCM, Keyless/Remote Start Data | Enable/Disable | Enable |
Remote Start Equipped | BCM, BCM ECU Configuration | Enable/Disable | Enable |
Remote Starts Remaining | BCM, Keyless/Remote Start Data | Counts | 2 Counts |
Remote Start Request | BCM, Keyless/Remote Start Data | Yes/No | No |
Remote Start Timer | BCM, Keyless/Remote Start Data | Counts | Varies |
Run/Crank Relay | BCM, Keyless/Remote Start Data | On/Off | On |
Run/Crank Relay Command | BCM, Keyless/Remote Start Data | On/Off | On |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF | |||
Crank Request Signal | Engine Electrical, PCM | Yes/No | No |
GEN Lamp Command | Engine Electrical, PCM | On/Off | Off |
GEN L-Terminal Signal Command | Engine Electrical, PCM | On/Off | Off |
Ignition 1 Signal | Engine Electrical, PCM | Volts | 12.6 V |
Starter Relay Command | Engine Electrical, PCM | On/Off | Off |
Starter Relay Circuit History | Engine Electrical, PCM | OK/Open/Short/Invalid State | OK |
