Tools Required

J 39400-A Halogen Leak Detector

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the compressor pressure relief valve.

Notice: Refer to Fastener Notice in the Preface section.

1. Install the compressor pressure relief valve.




Tighten
Tighten to 8 N·m (70 lb in).

2. Lower the vehicle.
3. Connect the battery negative cable.
4. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .
5. Leak test the fittings using the J 39400-A .