GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G6 🢒 Engine 🢒 Engine Mechanical - 2.2L or 2.4L 🢒 Powertrain Mount Balance - Lower Mount

Note: Follow the balance procedure in the order listed in the following steps. Powertrain mounts must be tightened in sequence.


    Object Number: 1578541 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Loosen, but DO NOT REMOVE the front transmission mount through bolt.

    3. Object Number: 1578542 Size: SH
  3. Loosen, but DO NOT REMOVE the rear transmission mount through bolt.
  4. Rock the powertrain vigorously from front to rear and allow the powertrain to settle.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Tighten the rear transmission mount through bolt.

    6. Tighten
    Tighten the bolt to 90 N·m (66 lb ft).


    Object Number: 1578541 Size: SH
  6. Tighten the front transmission mount through bolt.

    7. Tighten
    Tighten the bolt to 90 N·m (66 lb ft).

  7. Lower the vehicle.