GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G6 🢒 Engine 🢒 Engine Mechanical - 3.9L 🢒 Camshaft Position Actuator Magnet Replacement

Removal Procedure

    Object Number: 1583635 Size: SH
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement.
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
  3. Remove the engine mount snubber bracket. Refer to Engine Mount Snubber Bracket Replacement.
  4. Remove the engine mount bracket, if equipped with a convertible top. Refer to Engine Mount Bracket Replacement.
  5. Disconnect the camshaft position actuator magnet electrical connector.

    6. Object Number: 1557696 Size: SH
  6. Remove the camshaft position actuator magnet bolts.
  7. Remove the camshaft position actuator magnet and O-ring seal.

Installation Procedure

    Object Number: 1557696 Size: SH
  1. Install the camshaft position actuator magnet O-ring seal and magnet.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the camshaft position actuator magnet bolts and tighten to 10 N·m (89 lb in).

    3. Object Number: 1583635 Size: SH
  3. Connect the camshaft position actuator magnet electrical connector.
  4. Install the engine mount bracket, if equipped with a convertible top. Refer to Engine Mount Bracket Replacement.
  5. Install the engine mount snubber bracket. Refer to Engine Mount Snubber Bracket Replacement.
  6. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement.
  7. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement.