Special Tools

J 45025 Torque Wrench Adapter

1. Remove the drive belt. Refer to Drive Belt Replacement.
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.

1. Position the drive belt tensioner. Ensure that the tensioner is flush with the front cover.

Caution: Refer to Fastener Caution in the Preface section.

Note: In order to obtain the proper torque when using any torque wrench adapter you must use the following formula: Pre-set Torque = Torque Wrench Length x Torque Desired divided by Torque Wrench Length + Extension Length.

2. Install the drive belt tensioner bolt.

Using the J 45025 tighten the drive belt tensioner bolt.

Tighten
Tighten the bolt to 45 N·m (33 lb ft).

3. Install the drive belt. Refer to Drive Belt Replacement.