Removal Procedure
- Remove the left headlamp assembly. Refer to
Headlamp Replacement.
- Disconnect the horn electrical connector.
- Remove the horn bracket bolt.
- Remove the horn from the front frame rail.
Installation Procedure
- Position the horn into the slot in the front frame rail.
Caution: Refer to Fastener Caution in the Preface section.
- Install the horn bracket bolt.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Connect the horn electrical connector.
- Install the left headlamp assembly. Refer to
Headlamp Replacement.