GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G6 🢒 Safety and Security 🢒 Seat Belts 🢒 Driver or Passenger Seat Shoulder Belt Guide Adjuster Replacement

Removal Procedure

    Object Number: 157286 Size: SH
  1. Open the seat belt guide loop cover.
  2. Remove the guide loop nut.
  3. Remove the guide loop from the guide adjuster bracket.
  4. Remove the center pillar upper trim panel. Refer to Center Pillar Upper Garnish Molding Replacement.
  5. Remove the shoulder belt guide adjuster bracket bolts.
  6. Remove the shoulder belt guide adjuster bracket from the center pillar.

Installation Procedure

    Note: Verify that the release lever at the top of the bracket is in the full up position.


    Object Number: 157286 Size: SH
  1. Position shoulder belt guide adjuster bracket to the center pillar.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the shoulder belt guide belt adjuster bracket bolts.

    3. Tighten
    Tighten the shoulder belt guide adjuster bracket bolts to 35 N·m (25 lb ft).

  3. Install the upper center pillar trim panel. Refer to Center Pillar Upper Garnish Molding Replacement.
  4. Install the guide loop to the guide adjuster bracket.
  5. Install the guide loop nut.

    6. Tighten
    Tighten the guide loop nut to 35 N·m (25 lb ft).

  6. Close the guide loop cover.