GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Engine 🢒 Engine Exhaust 🢒 Exhaust Hanger Mounting Bracket Replacement

Removal Procedure

    Warning: Refer to Safety Glasses Warning in the Preface section.

    Danger: To avoid any vehicle damage, serious personal injury or death when major components are removed from the vehicle and the vehicle is supported by a hoist, support the vehicle with jack stands at the opposite end from which the components are being removed and strap the vehicle to the hoist.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 1947047 Size: SH
  2. Detach the intermediate exhaust assembly (2) by removing the center insulator hanger bracket to differential retaining bolt (1).
  3. Remove the intermediate exhaust assembly to center insulator hanger bracket insulators.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 1947047 Size: SH
  1. Install the intermediate exhaust assembly (2) by removing the center insulator hanger bracket to differential retaining bolt (1). Tighten the nuts to 45 N·m  (33 lb ft).
  2. Install the intermediate exhaust assembly to center insulator hanger bracket insulators.
  3. Lower the vehicle.