Exhaust Manifold Heat Shield Replacement - Left Side V8

1. Remove the engine dress cover. Refer to Engine Cover Replacement.

Warning: Refer to Exhaust Service Warning in the Preface section.

Warning: Refer to Protective Goggles and Glove Warning in the Preface section.




2. Remove the exhaust manifold heat shield to exhaust manifold retaining bolts (2).
3. Remove the exhaust manifold heat shield (1) from the exhaust manifold.

1. Position the exhaust manifold heat shield (1) to the exhaust manifold.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the exhaust manifold heat shield to exhaust manifold retaining bolts (2) and tighten to 10 N·m (89 lb in).
3. Install the engine dress cover. Refer to Engine Cover Replacement.

Exhaust Manifold Heat Shield Replacement - Left Side V6

Warning: Refer to Exhaust Service Warning in the Preface section.

Warning: Refer to Protective Goggles and Glove Warning in the Preface section.

1. Ignition OFF.

Warning: Refer to Battery Disconnect Warning in the Preface section.

2. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
3. Remove the engine cover. Refer to Engine Cover Replacement.
4. Remove the left pre-catalytic convertor heated oxygen sensor (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1.



5. Remove the exhaust manifold heat shield to exhaust manifold retaining bolts (1).
6. Remove the exhaust manifold heat shield (2).

1. Install the exhaust manifold heat shield (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the exhaust manifold heat shield to exhaust manifold retaining bolts (2) and tighten to 10 N·m (89 lb in).
3. Install the left pre-catylitic convertor HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 2 Sensor 1.
4. Install the engine cover. Refer to Engine Cover Replacement.
5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.