- Remove the spark plug leads (1).
Note: Do not remove the oil fill tube from the cover, unless service is required. If the oil fill tube has been removed from the cover, install a NEW tube during assembly.
- Remove the ignition coil bracket retaining studs (2).
- Remove the ignition coil and bracket assembly (1).
- Remove the valve rocker arm cover retaining bolts (2) and valve rocker arm cover (1).
- Remove and discard the valve rocker arm cover gasket, valve rocker arm cover grommets and valve rocker arm cover bolts if they are serviced with the grommet.
Note: The valve rocker arm cover gasket is a single use only component and must be replaced whenever the valve rocker arm cover is removed from the cylinder head.
- Remove the valve rocker arm cover gasket (1).
Discard the valve rocker arm cover gasket (1).