GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 G8 🢒 Engine 🢒 Engine Mechanical - 4.8L, 5.3L, 6.0L, 6.2L, or 7.0L 🢒 Engine Coolant Air Bleed Pipe and Hole Cover Installation

    Object Number: 1552485 Size: SH

    Note: Position the O-ring seal (308) onto the nipple portion of the pipe.

  1. Install the seals onto the engine coolant air bleed pipe and covers.

    2. Object Number: 1559855 Size: SH
  2. Install the pipe (307) and seals (308).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the bolts (309) and tighten to 12 N·m (106 lb in).

    4. Object Number: 1408862 Size: SH

    Note: Production engines use a rivet-type plug at the top rear coolant passage of each cylinder head. If service of a leaking plug is required, it is necessary to remove the cylinder head from the engine to properly remove the plug prior to cover installation.

  4. Install the covers (313) and seals (308).
  5. Install the bolts (312) and tighten to 12 N·m (106 lb in).