For 1990-2009 cars only
Removal Procedure
- Remove the windshield moulding garnish. Refer to Windshield Garnish Molding Replacement .
- Starting at the rear windshield pillar, carefully pry off the roof weld joint reveal moulding (1) from the roof weld joint, taking care not to break the roof weld joint reveal moulding retaining clips (2).
- Remove the roof weld joint reveal moulding (1).
- Clean the accessible area within roof weld joint recess with a suitable cleaning solution, using a lint free cloth.
Important: If the roof weld joint reveal moulding (1) cracks, breaks or is damaged in any way, it must be replaced.
Important: Protect the paint and body work with tape or a clean cloth. Failure to do so may result in damage to painted surfaces.
Installation Procedure
- Position the roof weld joint reveal moulding (1) on the vehicle and slide the rear end of the moulding (1) into the rear moulding retainer.
- Seat the roof weld joint reveal moulding (1) in the roof weld joint and starting at the rear, carefully engage the roof weld joint reveal moulding retaining clips (2) into position.
- Install the windshield moulding garnish. Refer to Windshield Garnish Molding Replacement .
Important: Make sure that the rear datum pin is positioned correctly to provide correct fitment clearance to the vehicle body.
