GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1943245  Size: SH

    Important: Care must be taken when removing the body side roof drip moulding to prevent possible damage.

    Important: Protect the paint and body work with tape or a clean cloth. Failure to do so may result in damage to painted surfaces.

    Important: Suitable precautions and care must be taken not to damage exterior painted surfaces on the vehicle body during the replacement procedure.

  1. Open the front and rear doors of the vehicle on the relevant side.
  2. Use a suitable tool to carefully remove the body side roof drip moulding (2), start from the front of the vehicle, prying the roof drip moulding retaining clips (1) away from the vehicle.
  3. Remove the body side roof drip moulding (2) from the vehicle.

Installation Procedure


    Object Number: 1943382  Size: SH

    Important: Make sure that the rear datum pin is positioned correctly to provide correct fitment clearance to the vehicle body.

  1. Clean the roof drip gutter recess with a suitable cleaning solution, using a lint free cloth.
  2. Install the body side roof drip moulding (1) into the recess, starting at the rear end of the body side roof drip moulding (1).
  3. Install the body side roof drip moulding rear datum pin (2) to the vehicle.

  4. Object Number: 1943245  Size: SH
  5. Install the remaining roof drip moulding retaining clips (1) working from the rear to the front of the vehicle.
  6. Close the front and rear doors of the vehicle on the relevant side.