GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the cruise control cable. Refer to Cruise Control Cable Replacement .

  2. Object Number: 1375223  Size: SH
  3. Pull the tang on the wiring harness connector (3), then pull the connector from the cruise control module (1).
  4. Remove the 3 cruise control module retaining screws (2).
  5. Remove the cruise control module from the mounting bracket (4).

Installation Procedure

  1. Position the cruise control module to the mounting bracket (4).
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1375223  Size: SH
  3. Install the 3 cruise control module retaining screws (2).
  4. Tighten
    Tighten the cruise control module retaining screws to 3.5 Nยทm (31 lb in).

  5. Push the connector to the cruise control module (1) until the tang on the wiring harness connector (3), locks in place.
  6. Install the cruise control cable. Refer to Cruise Control Cable Replacement .