GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Body Side Roof Drip Molding Replacement

Removal Procedure
  1. Open the door.

    2. Object Number: 1312036 Size: SH
  2. To remove the roof drip molding (2) from the roof, begin at each end and working towards the middle and remove the 8 screws (3) from the roof drip molding (2).
  3. Carefully remove the roof drip molding (2), disengaging the quarter window assembly tab (1).

Installation Procedure

    Object Number: 1312036 Size: SH
  1. Install the roof drip molding (2) to the vehicle, engaging the quarter window assembly tab (1).

    2. Notice: Refer to Fastener Notice in the Preface section.

    Important: The screws are encapsulated with a wax sealer, it is recommended that a small amount of sealer be applied to the end of the thread.

  2. Install the 8 screws (3), starting from the rear and work forward.

    3. Tighten
    Tighten the screws to 1.5 N·m (13 lb in).

  3. Close the door.