GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Wipers/Washer Systems 🢒 Windshield Pillar Garnish Molding Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  2. Remove the rear seat back rest. Refer to Rear Seat Back Replacement in Seats.
  3. Partially remove the rear portion of the door sill plate to allow removal of the rear quarter trim panel. Refer to Door Sill Plate Replacement .
  4. Remove the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  5. Remove the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  6. Remove the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .

    7. Object Number: 1355295 Size: SH

    Important: Use caution when removing the windshield side garnish to avoid damaging the side garnish locating pin.

  7. Starting at the upper rear edge of the windshield side garnish (1), disengage the windshield side garnish attaching clips (2).
  8. Remove the windshield side garnish.

Installation Procedure

    Object Number: 1355295 Size: SH
  1. Position the windshield side garnish.
  2. Position locating pin (3).
  3. Starting at the lower edge of the windshield side garnish (1), install the windshield side garnish attaching clips (2).
  4. Install the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  5. Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
  6. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement .
  7. Install the rear portion of the door sill plate. Refer to Door Sill Plate Replacement .
  8. Install the rear seat back rest. Refer to Rear Seat Back Replacement in Seats.
  9. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.