Front Wheel Speed Sensor Wiring Harness Replacement Left

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Remove the wheel speed sensor jumper electrical connector (3) from retaining clip (4).
3. Disconnect the wheel speed sensor jumper electrical connector (3).



4. Pull the grommet and wheel speed jumper harness through the inner fender pass-through.
5. Remove the wheel speed sensor jumper (2) from the front strut mounting (3), noting the routing of the wheel speed sensor jumper.



6. Disconnect the wheel speed sensor jumper connector (1) from the wheel speed sensor (2).
7. Remove the wheel speed sensor jumper harness.

1. Connect the wheel speed sensor jumper connector (1) to the wheel speed sensor (2).



2. Install the wheel speed sensor jumper (2) to the front strut mounting (3), routing the wheel speed sensor jumper as previously noted.
3. Route wheel speed jumper harness and grommet through the inner fender pass-through.



4. Connect the wheel speed sensor jumper electrical connector (3).
5. Install the wheel speed sensor jumper electrical connector (3) into the retaining clip (4).
6. Lower the vehicle.

Front Wheel Speed Sensor Wiring Harness Replacement Right

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



2. Remove the wheel speed sensor jumper electrical connector (3) from retaining clip (4).
3. Disconnect the wheel speed sensor jumper electrical connector (3).



4. Pull the grommet and wheel speed jumper harness through the inner fender pass-through.
5. Remove the wheel speed sensor jumper (2) from the front strut mounting (3), noting the routing of the wheel speed sensor jumper.



6. Disconnect the wheel speed sensor jumper connector (1) from the wheel speed sensor (2).
7. Remove the wheel speed sensor jumper harness.

1. Connect the wheel speed sensor jumper connector (1) to the wheel speed sensor (2).



2. Install the wheel speed sensor jumper (2) to the front strut mounting (3), routing the wheel speed sensor jumper as previously noted.
3. Route wheel speed jumper harness and grommet through the inner fender pass-through.



4. Connect the wheel speed sensor jumper electrical connector (3).
5. Install the wheel speed sensor jumper electrical connector (3) into the retaining clip (4).
6. Lower the vehicle.