GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Transmission/Transaxle 🢒 Manual Transmission - Tremec 6-Speed 🢒 Shift Control Shift Closeout Boot Replacement

Removal Procedure
  1. Remove the control lever assembly. Refer to Shift Control Assembly Replacement .
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

    3. Object Number: 1371031 Size: SH
  3. Remove the shift control closeout boot retaining nuts (3).
  4. Lower the vehicle.
  5. Remove the shift control closeout boot (1) and retaining plate assembly from the vehicle.
  6. Inspect the boot for damage, replace boot as necessary.

Installation Procedure

    Object Number: 1371031 Size: SH
  1. Install the shift control closeout boot (1) and retaining plate assembly in the vehicle.
  2. Raise and suitably support the vehicle.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the 4 shift control closeout boot retaining nuts.

    4. Tighten
    Tighten the shift control closeout boot retaining nuts to 15 N·m (11 lb ft).

  4. Lower the vehicle.

    5. Object Number: 1371039 Size: SH
  5. Push the shift control closeout boot (1) down until it seats on the control lever (2).
  6. Install the control lever assembly. Refer to Shift Control Assembly Replacement .