THE PASSLOCK(R) LOCK CYLINDER IN-LINE CONNECTOR CAVITY DESIGNATION AS DESCRIBED IN THE SERVICE MANUAL HAS INCORRECT PIN OUT DESCRIPTIONS DUE TO AN ENGINEERING CHANGE.
REPLACE THE PASSLOCK(R) LOCK CYLINDER IN-LINE CONNECTOR CAVITY DESIGNATION AS DESCRIBED IN THE FOLLOWING SECTIONS OF THE SERVICE MANUAL: ELECTRICAL DIAGNOSIS, PAGES 8A-80-6, 8A-133-0, INSTRUMENT PANEL CLUSTER (IPC) MICROPROCESSOR, PAGE 8C1-16, THEFT DETERRENT SYSTEM, PAGE 9D-6, AND ALL APPROPRIATE DIAGNOSTIC TABLES.
OLD IN-LINE CONNECTOR NEW IN-LINE CONNECTOR (TERMINAL/CIRCUIT #) (TERMINAL/CIRCUIT #) ===================== =====================
1/1459 A/1459 2/1835 B/1835 3/1836 C/1836
FIGURES: 00 ATTACHMENTS: 00
GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.
COPYRIGHT 1996 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.