For 1990-2009 cars only
Removal Procedure
- Remove the lower closeout cover (3).
- Remove screws from the lower closeout (2).
- Remove the closeout from the pull cup by prying the spring clip from the pull cup.
- Push the forward spring clip rearward and pull upward on the switch bezel assembly.
Installation Procedure
- Place the switch bezel assembly into the opening and press down in order to retain the 4 clips.
- Place the lower pull cup closeout into the notches of the switch bezel, align the spring clips and squeeze the switch bezel and closeout together (1).
- Drive the screws in order to secure the assembly (2).
- Snap in the screw cover (3).
