For 1990-2009 cars only
Removal Procedure (VIN 1)
- Disconnect the negative battery cable.
- Raise the vehicle.
- Remove the driver side rear wheel and housing liner.
- Remove the hoses from canister. Mark the hoses to ensure correct installation on new canister.
- Remove the canister to canister bracket retaining bolt.
- Remove the canister.
Important: Inspect the canister hoses for damage or deterioration. Refer to Emission Hose Routing Diagram for proper routing of canister hoses. When replacing the lines, use the correct replacement part.
Removal Procedure (VIN K)
- Disconnect the negative battery cable.
- Raise the vehicle.
- Remove the driver side rear wheel and housing liner.
- Remove the hoses from canister. Mark the hoses to ensure correct installation on new canister.
- Remove the canister to canister bracket retaining bolt.
- Remove the canister.
Important: Inspect the canister hoses for damage or deterioration. Refer to Emission Hose Routing Diagram for proper routing of canister hoses. When replacing the lines, use the correct replacement part.
Installation Procedure (VIN 1)
- Install the canister.
- Tighten the canister to canister bracket bolt.
- Install the hoses to canister. Make sure the connections are correct.
- Install the driver side housing liner and wheel assembly.
- Lower the vehicle
- Reconnect the negative battery cable.
Tighten
Torque the wheel lug nuts to 140 N·m (104 lb ft).
Installation Procedure (VIN K)
- Install the canister.
- Tighten the canister to canister bracket bolt.
- Install the hoses to canister. Make sure the connections are correct.
- Install the driver side housing liner and wheel assembly.
- Lower the vehicle
- Reconnect the negative battery cable.
Tighten
Torque the wheel lug nuts to 140 N·m (104 lb ft).
