SMU - SECTION 3A - REVISED WHEEL ALIGNMENT SPECS.. Pontiac Grand Prix 1997

SUBJECT: SERVICE MANUAL UPDATE - SECTION 3A - REVISED WHEEL ALIGNMENT SPECIFICATIONS

MODELS: 1997 PONTIAC GRAND PRIX

THIS BULLETIN IS BEING ISSUED TO REVISE THE WHEEL ALIGNMENT SPECIFICATIONS FOUND IN SECTION 3A OF THE SERVICE MANUAL.

IMPORTANT: ALL UNITS LISTED BELOW ARE IN DEGREES.

FRONT WHEEL ALIGNMENT SPECIFICATIONS

OPERATION SERVICE CHECKING SERVICE SETTING ========= ================ ===============

CASTER 3.0 +/- 0.5 NOT ADJUSTABLE

CAMBER 15" TIRES -0.85 +/- 0.5 -0.85 +/- 0.5

CAMBER 16" TIRES -0.94 +/- 0.5 -0.94 +/- 0.5

TOE (TOTAL) 0.10 +/- 0.2 0.10 +/- 0.2

STEERING ANGLE 0 +/- 3.5 0 +/- 3.5

REAR WHEEL ALIGNMENT SPECIFICATIONS

OPERATION SERVICE CHECKING SERVICE SETTING ========= ================ ===============

CAMBER 15" TIRES -0.9 +/- 0.5 -0.9 +/- 0.5

CAMBER 16" TIRES -1.0 +/- 0.5 -1.0 +/- 0.5

TOE (TOTAL) 0.10 +/- 0.2 0.10 +/- 0.2

THRUST ANGLE 0 +/- 0.15 0 +/- 0.15

FIGURES: 00 ATTACHMENTS: 00

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.