1. Disconnect the inside air temperature sensor harness connector.
2. Turn the ignition switch to the RUN position.
3. Place the heater-A/C control in the AUTO position.
4. Use a digital multimeter (DMM) in order to measure the voltage between the inside air temperature sensor harness connector terminal A (circuit 734) and ground.

Is the measured voltage within the specified range?

4-6 V

Go to Step 2

Go to Step 3

Use a DMM in order to measure the voltage between the inside air temperature sensor harness connector terminal A (circuit 734) and terminal B (circuit 61).

Is the measured voltage within the specified range?

4-6 V

Go to Step 4

Go to Step 5

1. Place the ignition switch in the OFF position.
2. Reconnect the inside air temperature sensor.
3. Disconnect the Heater-A/C control harness connector.
4. Use a test lamp, connected to B+, in order to probe the heater-A/C control harness connector terminal D 2.

Does the test lamp light?

--

Go to Step 7

Go to Step 6

Replace the inside air temperature sensor. Refer to Inside Air Temperature Sensor Replacement .

Is the repair complete?

--

System OK

--

Locate and repair an open in circuit 61 (YEL) between the inside air temperature sensor harness connector terminal B and S 258.

Is the repair complete?

--

System OK

--

Locate and repair an open in circuit 734 (DK GRN) between the heater-A/C control harness connector and the inside air temperature sensor connector.

Is the repair complete?

--

System OK

--

Replace the heater-A/C control. Refer to Control Assembly Replacement .

Is the repair complete?

--

System OK

--